Wheel Refurbishment in Wasl Green Park, Dubai
Get a price on WhatsApp
Fill this in and we reply with a price and a time. The message writes itself, so you only tap send.
Would rather talk? Call +971 55 168 5050. Someone answers 24 hours.
CNC lathe rim repair and custom powder coating
Wheel Refurbishment at Bud Car Wash, Shop #7, 44, 22nd Street, Ras Al Khor Industrial Area 2. About 8 minutes from Wasl Green Park via Nad Al Hamar Road, and open 24 hours a day with no appointment needed.
Why Wasl Green Park Drivers Book Wheel Refurbishment
Wheels on cars in Wasl Green Park are usually the first thing that lets down an otherwise well-kept vehicle. CNC refinishing returns them to factory condition.
More on what this area does to vehicles is on our Wasl Green Park page.
What Wheel Refurbishment Includes
- Wheels mounted on a precision CNC lathe
- Curb rash machined away
- Bent rims straightened
- Fresh powder coat finish
- Restored to factory condition
Full detail on this service, including what it covers and how it is carried out, is on the main Wheel Refurbishment page. Wash and detailing prices are in the price table; for protection, wheel and mechanical work call +971 55 168 5050 for a quote on your vehicle.
How Wheel Refurbishment Works at Our Ras Al Khor Bay
How long it takes. Two to three days for a full set. Wait or leave the car? Leave the car, or leave the wheels if you have spares.
- Tyres are removed and wheels are stripped of old lacquer and coating
- Each wheel is checked for buckles and cracks. Cracks are a structural decision, not a cosmetic one
- Mounted on a CNC lathe and machined to remove kerb damage and true the face
- Bent rims straightened on a press before refinishing
- Powder coated, cured in an oven, then tyres refitted and balanced
What to Check Before Booking Wheel Refurbishment Anywhere in Dubai
This applies wherever you go, not just to us. Wasl Green Park drivers have plenty of options, and these are the questions that separate a job done properly from one that looks fine for a month.
- Ask whether cracks are welded or refused. A welded alloy wheel is a structural repair and not every shop will tell you they did it
- Ask whether the finish is powder coated or wet sprayed. Powder coat is far more durable in UAE sun
- Ask whether wheels are machined on a lathe or filled and sanded. Filler shrinks and reappears
- Ask whether tyres are rebalanced after refitting. Skipping it causes vibration you will blame on the wheels
- Ask about colour matching if you are doing fewer than four
Before You Set Out From Wasl Green Park
Getting your car ready
Tell us if any wheel has been repaired before, and if you have locking wheel nuts, bring the key. If a wheel has a slow puncture you have been topping up, mention it, because that often turns out to be a crack rather than a valve.
When to travel from Wasl Green Park
A short run on Nad Al Hamar Road, quiet outside school hours. Close enough that an evening visit costs almost nothing in travel time.
We are open 24 hours, so the timing is genuinely yours to choose. There is no night rate, no weekend rate and no public holiday rate.
After Your Wheel Refurbishment
Recheck wheel nut torque after the first hundred kilometres, and have the balance rechecked if you feel any new vibration.
Wheel Refurbishment in Wasl Green Park: Common Questions
How long will wheel refurbishment take if I am driving from Wasl Green Park?
Two to three days for a full set. Wasl Green Park is about 8 minutes away, so allow that each way on top. Leave the car, or leave the wheels if you have spares.
Can I get this done outside working hours from Wasl Green Park?
Yes. We are open 24 hours a day, seven days a week, including public holidays, and there is no night rate or weekend rate. A short run on Nad Al Hamar Road, quiet outside school hours. Close enough that an evening visit costs almost nothing in travel time.
Do I need to book wheel refurbishment in advance?
No. Walk-ins are welcome at any hour. For work that keeps the car with us, calling ahead on +971 55 168 5050 means we can tell you the realistic turnaround before you drive over from Wasl Green Park.
How should I prepare the car before coming from Wasl Green Park?
Tell us if any wheel has been repaired before, and if you have locking wheel nuts, bring the key. If a wheel has a slow puncture you have been topping up, mention it, because that often turns out to be a crack rather than a valve.
What do I need to do afterwards?
Recheck wheel nut torque after the first hundred kilometres, and have the balance rechecked if you feel any new vibration.
Booking Wheel Refurbishment From Wasl Green Park
Head via Nad Al Hamar Road and follow signs for Ras Al Khor Industrial Area 2, then turn onto 22nd Street. We are at unit 44, shop 7, with free parking on site while we work.
Because we never close, drivers from Wasl Green Park often come outside peak hours. There is no night rate and no weekend rate.
See all services, all areas we serve, or how to find us.