Wheel Refurbishment in Liwan, Dubai
CNC lathe rim repair and custom powder coating
Wheel Refurbishment at Bud Car Wash, Shop #7, 44, 22nd Street, Ras Al Khor Industrial Area 2. About 15 minutes from Liwan via Al Ain Road, and open 24 hours a day with no appointment needed.
Why Liwan Drivers Book Wheel Refurbishment
Sand and grit on the roads around Liwan sandblast wheel faces over time, dulling the lacquer. Machining and re-coating restores the finish rather than hiding it.
More on what this area does to vehicles is on our Liwan page.
What Wheel Refurbishment Includes
- Wheels mounted on a precision CNC lathe
- Curb rash machined away
- Bent rims straightened
- Fresh powder coat finish
- Restored to factory condition
Full detail on this service, including what it covers and how it is carried out, is on the main Wheel Refurbishment page. Wash and detailing prices are in the price table; for protection, wheel and mechanical work call +971 55 168 5050 for a quote on your vehicle.
How Wheel Refurbishment Works at Our Ras Al Khor Bay
How long it takes. Two to three days for a full set. Wait or leave the car? Leave the car, or leave the wheels if you have spares.
- Tyres are removed and wheels are stripped of old lacquer and coating
- Each wheel is checked for buckles and cracks. Cracks are a structural decision, not a cosmetic one
- Mounted on a CNC lathe and machined to remove kerb damage and true the face
- Bent rims straightened on a press before refinishing
- Powder coated, cured in an oven, then tyres refitted and balanced
What to Check Before Booking Wheel Refurbishment Anywhere in Dubai
This applies wherever you go, not just to us. Liwan drivers have plenty of options, and these are the questions that separate a job done properly from one that looks fine for a month.
- Ask whether cracks are welded or refused. A welded alloy wheel is a structural repair and not every shop will tell you they did it
- Ask whether the finish is powder coated or wet sprayed. Powder coat is far more durable in UAE sun
- Ask whether wheels are machined on a lathe or filled and sanded. Filler shrinks and reappears
- Ask whether tyres are rebalanced after refitting. Skipping it causes vibration you will blame on the wheels
- Ask about colour matching if you are doing fewer than four
Before You Set Out From Liwan
Getting your car ready
Tell us if any wheel has been repaired before, and if you have locking wheel nuts, bring the key. If a wheel has a slow puncture you have been topping up, mention it, because that often turns out to be a crack rather than a valve.
When to travel from Liwan
Al Ain Road again. From Liwan the morning peak inbound is the one to avoid; the rest of the day and evening runs freely.
We are open 24 hours, so the timing is genuinely yours to choose. There is no night rate, no weekend rate and no public holiday rate.
After Your Wheel Refurbishment
Recheck wheel nut torque after the first hundred kilometres, and have the balance rechecked if you feel any new vibration.
Wheel Refurbishment in Liwan: Common Questions
How long will wheel refurbishment take if I am driving from Liwan?
Two to three days for a full set. Liwan is about 15 minutes away, so allow that each way on top. Leave the car, or leave the wheels if you have spares.
Can I get this done outside working hours from Liwan?
Yes. We are open 24 hours a day, seven days a week, including public holidays, and there is no night rate or weekend rate. Al Ain Road again. From Liwan the morning peak inbound is the one to avoid; the rest of the day and evening runs freely.
Do I need to book wheel refurbishment in advance?
No. Walk-ins are welcome at any hour. For work that keeps the car with us, calling ahead on +971 55 168 5050 means we can tell you the realistic turnaround before you drive over from Liwan.
How should I prepare the car before coming from Liwan?
Tell us if any wheel has been repaired before, and if you have locking wheel nuts, bring the key. If a wheel has a slow puncture you have been topping up, mention it, because that often turns out to be a crack rather than a valve.
What do I need to do afterwards?
Recheck wheel nut torque after the first hundred kilometres, and have the balance rechecked if you feel any new vibration.
Booking Wheel Refurbishment From Liwan
Head via Al Ain Road and follow signs for Ras Al Khor Industrial Area 2, then turn onto 22nd Street. We are at unit 44, shop 7, with free parking on site while we work.
Because we never close, drivers from Liwan often come outside peak hours. There is no night rate and no weekend rate.
See all services, all areas we serve, or how to find us.